Unit Introduction

Please note that we are happy for you to source the following equipment from any vendor. We have no affiliations or interest in any of these.

We have deliberately itemised these to enable you to buy what you need. Some of you may already have these things lying around so we didn't want to produce a kit. Most of you will have a spare USB charger and

Resource List & Suppliers

• Raspberry Pi Zero WH https://core-electronics.com.au/raspberry-pi-zero-wh.html
• SD card https://core-electronics.com.au/jumper-wires-7-8-f-m-high-quality-30-pack.html
• MicroSD card to USB reader https://core-electronics.com.au/usb-microsd-card-reader-writer-microsd-microsdhc-microsdxc.html
• LEDs https://core-electronics.com.au/led-rainbow-pack-5mm-pth.html
• Resistors: https://core-electronics.com.au/resistor-330-ohm-1-6-watt-pth-20-pack.html
• USB to TTL: https://core-electronics.com.au/usb-to-ttl-serial-uart-rs232-adaptor-pl2303hx.html
• Case and breadboard https://core-electronics.com.au/modmypi-pi-zero-breadboard-case.html
• Jumper Wires 7.8" F/M https://core-electronics.com.au/jumper-wires-7-8-f-m-high-quality-30-pack.html
• Temp Sensor https://core-electronics.com.au/lm35dz-temperature-sensor.html
• Fan https://core-electronics.com.au/cooling-fan-for-raspberry-pi.html
• Motor https://core-electronics.com.au/dc-toy-hobby-motor-130-size.html
• Battery clip https://core-electronics.com.au/9v-battery-clip.html
• Battery https://core-electronics.com.au/9v-battery.html
• Must test: https://www.amazon.com.au/SunFounder-Mifare-Reader-Arduino-Raspberry/dp/B07KGBJ9VG/ref=pd_aw_sbs_147_2/357-7888783-5124228?_encoding=UTF8&pd_rd_i=B07KGBJ9VG&pd_rd_r=1e5e4ca5-4cd5-41df-a486-580b36b99720&pd_rd_w=q27lJ&pd_rd_wg=JFHCt&pf_rd_p=1360aa1f-12c4-4a58-b004-81f2e07f6c52&pf_rd_r=CGS3T9V08HPMDJSJX3KN&psc=1&refRID=CGS3T9V08HPMDJSJX3KN