Unit Introduction
Please note that we are happy for you to source the following equipment from any vendor. We have no affiliations or interest in any of these.
We have deliberately itemised these to enable you to buy what you need. Some of you may already have these things lying around so we didn't want to produce a kit. Most of you will have a spare USB charger lying around so that has not been included.
The kit below is designed to contain everything required to complete the unit with nothing more than a laptop with 8GB RAM and a spare USB port. We have carefully designed this so that you do not even need an external monitor with a HDMI port and keyboard. You also do not require a soldering iron or soldering skills. You may initially require a small screwdriver set.
Resource List & Suppliers
- Raspberry Pi Zero WH https://core-electronics.com.au/raspberry-pi-zero-wh.html
- SD card https://core-electronics.com.au/jumper-wires-7-8-f-m-high-quality-30-pack.html
- MicroSD card to USB reader https://core-electronics.com.au/usb-microsd-card-reader-writer-microsd-microsdhc-microsdxc.html
- Micro USB cable https://core-electronics.com.au/micro-usb-cable.html
- LEDs https://core-electronics.com.au/led-rainbow-pack-5mm-pth.html
- Resistors: https://core-electronics.com.au/resistor-330-ohm-1-6-watt-pth-20-pack.html
- USB to TTL: https://core-electronics.com.au/usb-to-ttl-serial-uart-rs232-adaptor-pl2303hx.html
- Case and breadboard https://core-electronics.com.au/modmypi-pi-zero-breadboard-case.html
- Jumper Wires 7.8" F/M https://core-electronics.com.au/jumper-wires-7-8-f-m-high-quality-30-pack.html
- Temp Sensor https://core-electronics.com.au/lm35dz-temperature-sensor.html
- Fan https://core-electronics.com.au/cooling-fan-for-raspberry-pi.html
- Motor https://core-electronics.com.au/dc-toy-hobby-motor-130-size.html
- Battery clip https://core-electronics.com.au/9v-battery-clip.html
- Battery https://core-electronics.com.au/9v-battery.html
- NFC - Must test:
- PN532 https://core-electronics.com.au/adafruit-pn532-nfc-rfid-controller-shield-for-arduino-extras.html
- RC522 https://www.amazon.com.au/SunFounder-Mifare-Reader-Arduino-Raspberry/dp/B07KGBJ9VG/ref=pd_aw_sbs_147_2/357-7888783-5124228?_encoding=UTF8&pd_rd_i=B07KGBJ9VG&pd_rd_r=1e5e4ca5-4cd5-41df-a486-580b36b99720&pd_rd_w=q27lJ&pd_rd_wg=JFHCt&pf_rd_p=1360aa1f-12c4-4a58-b004-81f2e07f6c52&pf_rd_r=CGS3T9V08HPMDJSJX3KN&psc=1&refRID=CGS3T9V08HPMDJSJX3KN
