Tunneling Services

The point of this lab is to show you how you can tunnel services over an untrusted network. The tunnelling mechanism that we are using in this lab is Point-to-Point Tunneling Protocol (PPTP). While it is not the most secure mechanism it does work easily on many computers and mobile devices.

Virutal Machine setup

You will be installing PPTP on your Linux Virtual machine. We want to make this available for your mobile devices and your host computer (OSX or Windows) to be able to tunnel to it.

• If you are at home on a standard WiFi network then you should configure your virtual machine in bridged mode. In virtual box, right-click on your virtual machine: Settings->Network. Then attach to Bridged adaptor and then link it to your adapter that connects to the Internet.
• If you are connected to a work network or a network like eduroam then you will need two virtual machines in NAT network as demonstrated in Linux_Essentials_&_VM_Networks#Create_a_Second_Virtual_Machine_and_Network

Configuration of the PPTP Server

Start by installing the required Linux packages for the lab on the Linux device that will be the server:

sudo apt update
sudo apt install uml-utilities
sudo apt install pptpd
sudo apt install net-tools

Then, issue an:

ifconfig

What is the IP address of your Ubuntu machine. This will act as the VPN server and your VPN Clients must be able to connect to or hit it. This interface will represent the external, Internet facing side of our companies VPN. For me this was 192.168.88.246.

We will now create our internal virtual tap0 interface. This interface and the associated subnet is going to represent the internal LAN that our remote users will have access to. You will have successfully completed the lab when your remote devices are able to ping 10.0.0.1 through your pptpd tunnel.

Create the internal LAN interface with:

sudo tunctl -t tap0

sudo ifconfig tap0 inet 10.0.0.1 netmask 255.255.255.0

Ensure that the interface has been created by typing:

ifconfig

Verify that you can ping it before moving on.

Configure the PPTPD server with:

sudo nano /etc/pptpd.conf

Uncomment and change the following lines to

localip 10.0.0.1
remoteip 10.0.0.234-238,10.0.0.245

Disable the logwtmp option by adding a # before it. The issue appears to have been logged as a bug here:

https://bugs.launchpad.net/ubuntu/+source/pptpd/+bug/1451419

Then have a look through:

sudo nano /etc/ppp/pptpd-options

This configuration should not need editing but it is interesting to look at as it describes the authentication and encryption parameters of your VPN

Edit the chap secrets:

sudo nano /etc/ppp/chap-secrets

This file follows the following format

<username> <IP> <users-password> <IP>

Edit it to look like:

# Secrets for authentication using CHAP
# client        server  secret                  IP addresses
student         *       student                 *

The asterisk characters mean any

As with all linux servers, once the configuration has changed, you must restart the service using:

sudo /etc/init.d/pptpd restart

Finally, any linux server/router that will be moving packets over different subnets needs IP forwarding enabled. You must edit the following file and replace the 0 with a 1.

sudo nano /proc/sys/net/ipv4/ip_forward

Connect your remote devices to the AP and ensure that they can ping the Linux PPTP server at 192.168.1.150. This wireless network really represents the Internet or any network that is insecure. Try to work out to VPN to 192.168.1.1. Remember that it it a PPTP VPN. Have a play with different PCs (unix and Win), ipads/iphones, droid phones/tabs.

Before connecting to a device, monitor the logs on the server with:

tail -f /var/log/syslog

The output may help you to debug any problems.

Connnecting the Client

Try connecting your phone and your regular laptop. When you connect successfully you should see the following output.

May  3 14:20:13 ciscolabLI pppd[5139]: local  IP address 10.0.0.150
May  3 14:20:13 ciscolabLI pppd[5139]: remote IP address 10.0.0.234

The remote IP address of 10.0.0.234 indicates the IP of your VPN device.

If you connect from a Windows or linux PC you should try pinging 10.0.0.1 and 10.0.0.150 from your 'remote' device

If you are connecting from a phone or a tablet, you may need to ping or nmap the device from your ubuntu server as some of these devices lack network troubleshooting tools. As you connect more devices add more usernames. Add more to the CHAP file:

sudo nano /etc/ppp/chap-secrets

Remember to restart the service

sudo /etc/init.d/pptpd restart

When you have multiple devices configured, you should be able to ping between them all, get the addresses from an ifconfig/ipconfig or from the output show in a

tail -f /var/log/syslog

Ensure that you are only connecting users with MSCHAP and MPPE 128-bit stateless compression. If your mobile device has gone to sleep it will not respond to pings.